HP ROM-Based Setup Utility - Manual (Page 211)

Intelligent Provisioning Quick Configs settings (Intel-based servers)
RBSU power management
options Maximum performance Minimum power usage Balanced power and
performance
Enabled Disabled Enabled “Channel Interleaving”
(page 59)
Maximum Supported PCIe Generation 1 Maximum Supported “Maximum PCI Express
Speed” (page 63)
Optimized for Performance Optimized for Power Optimized for Performance “DIMM Voltage Preference”
(page 69)
Boot options
Near the end of the boot process, the boot options screen is displayed. This screen is visible for
several seconds before the system attempts to boot from a supported boot device. During this time,
you can press the following keys:
Action Key
Access RBSU. F9
In Gen8 systems: Access Intelligent Provisioning. In G7 systems: Access the System
Maintenance Menu, which enables you to launch ROM-based Diagnostics or Inspect. F10
Force a PXE Network boot. F12
Operating System Installation
For an assisted operating system installation:
•
In Gen8 environments, boot the server and press F10 when prompted to open the Intelligent
Provisioning tool.
•
In G7 environments, insert the SmartStart CD into the CD-ROM drive to begin the installation
process. The operating system and server support software are installed upon completion of
this process.
For a manual OS installation, insert the operating system CD into the CD-ROM to begin the
installation process.
Boot options 211