Rbsu cli commands – HP ROM-Based Setup Utility User Manual
Page 196
RBSU CLI Commands
The CLI mode of RBSU is a different interface that provides equivalent functionality to the menu-based
mode.
Description
Usage
Command
Displays all supported commands or
usage and descriptions of a specific
command.
HELP or HELP
HELP
Exits RBSU and resets or power-cycles
system.
EXIT, QUIT
EXIT, QUIT
SHOW CONFIG displays all available
SHOW CONFIG
SHOW CONFIG
SHOW CONFIG
SHOW CONFIG
SHOW CONFIG SCRIPT displays the
script required to recreate the settings
of the server.
Displays list of CONFIG options that
are viewable or settable using SHOW
or SET CONFIG on this server.
SHOW CONFIG OPTIONS
SHOW CONFIG OPTIONS
Displays the script of SET commands
required to recreate all the server
SHOW CONFIG SCRIPT
SHOW CONFIG SCRIPT
system-related configuration settings.
Does not display script for Passwords,
Date/Time, or Serial Number.
Sets CONFIG option setting to choice
specified by
SET CONFIG
SET CONFIG
to the number of the choice listed by
SHOW CONFIG for that particular
option.
Displays current serial number value.
SHOW SN
SHOW SN
Sets serial number to the value
specified.
SET SN
SET SN
Displays currently configured boot
controller order list.
SHOW BOOT
SHOW BOOT
Sets new primary boot controller to
controller number in list displayed by
SET BOOT
SET BOOT
SHOW BOOT command, and then
displays the new list.
Sets controller order # entry to device
specified by PCI ID and location. This
SET BOOT
SET BOOT (alternate usage for
scripting)
format is only used by SCRIPT driven
commands. Order # is 1-based where
1 is the primary boot controller, and so
on.
Displays current standard boot order
device list of IPL devices in priority
order.
SHOW IPL
SHOW IPL
Sets standard boot order priority for the
IPL device specified to new priority
SET IPL [A:|C:|CD|PXE]
SET IPL
number specified. The device specified
must be represented in the current IPL
list displayed by SHOW IPL.
196
RBSU BIOS Serial Console (CLI)