HP ROM-Based Setup Utility - Manual (Page 72)

Dynamic Power Capping Functionality
NOTE: This option is available on Gen8 servers.
This option controls whether the System ROM Power Calibration is run during the boot process.
Options include:
•
Enabled (default)—The System ROM Power Calibration is executed during the boot process.
•
Disabled—The System ROM Power Calibration will not be executed during the boot process.
Boot time will be faster, but you will no longer be able to configure Dynamic Power Capping
via iLO.
72 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)