HP ROM-Based Setup Utility - Manual (Page 87)

Server Security menu
The Server Security menu includes options that control access to the server and its utilities:
•
“Set Power-On Password” (page 87)
•
“Set Admin Password” (page 88)
•
“Network Server Mode” (page 89)
•
“Intelligent Provisioning (F10 Prompt)” (page 90)
•
“Trusted Platform Module” (page 91)
Set Power-On Password
The Set Power-On Password option sets a password that controls access to the server during
power-up. The server cannot be powered up until the correct password is entered. To disable or
clear the password, enter the password followed by a / (slash) when prompted to enter the
password. To disable or clear the password, enter the password followed by a / (slash) when
prompted to enter the password.
Password requirements:
•
Seven characters maximum.
•
Can be any combination of numbers, letters, and special characters.
Server Security menu 87