Active display – Canon PowerShot D30 User Manual
Page 81
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
81
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
•
To switch to Shooting mode from Playback mode, press the shutter button
halfway.
•
To deactivate Scroll Display, choose MENU (
1] tab > [Scroll
Display] > [Off].
•
To have the most recent shot displayed when you enter Playback mode,
choose MENU (
) > [
1] tab > [Resume] > [Last shot].
•
To change the transition shown between images, access MENU (
choose your desired effect in [
1] tab > [Transition].
Still Images
Movies
Active Display
To switch images during image display, you can tap the camera gently on
the side, as shown below.
Switch to next image
Switch to previous image
•
Always keep the strap around your wrist and hold the camera
securely to avoid dropping it.
•
Images may not be switched in some cases, depending on how the
camera is tapped.
•
To switch images quickly while images are selected as described in step 2
of “Viewing” (
n> button and deactivate
[Scroll Display] on the [
1] tab), hold down the button and tilt the camera.
Note that images appear grainy at this time.
•
To deactivate Active Display, press the <
n> button, choose [Active Display]
on the [
1] tab, and then choose [Off] (
).