Deactivating the red-eye reduction lamp, Changing the image display period after shots – Canon PowerShot D30 User Manual
Page 48
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
48
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce red-
eye when the flash is used in low-light shots.
1
Access the [Flash Settings]
screen.
z
z
Press the <
n> button, choose
[Flash Settings] on the [
4] tab, and then
press the <
m> button (
).
2
Configure the setting.
z
z
Choose [Red-Eye Lamp], and then
choose [Off] (
).
z
z
To restore the original setting, repeat this
process but choose [On].
Still Images
Changing the Image Display Period after
Shots
Change how long images are displayed after shots as follows.
Configure the setting.
z
z
Press the <
n> button, choose
[Review] on the [
4] tab, and then
choose the desired option (
).
z
z
To restore the original setting, repeat this
process but choose [2 sec.].
2 – 10 sec.
Displays images for the specified time.
Hold
Displays images until you press the shutter button halfway.
Off
No image display after shots.