Powering the camera with household power, Using the silicone jacket – Canon PowerShot D30 User Manual
Page 118
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
118
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
•
When the camera and TV are connected, you can also shoot while previewing
shots on the larger screen of the TV. To shoot, follow the same steps as when
using the camera screen. However, AF-Point Zoom (
), Stitch Assist
(
) are not available.
Still Images
Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC40 (sold separately)
eliminates the need to monitor the remaining battery level.
1
Make sure the camera is off.
2
Connect the adapter to the
camera.
z
z
Open the cover and insert the adapter
plug fully into the camera.
3
Connect the power cord.
z
z
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
z
z
Turn the camera on and use it as desired.
z
z
When finished, turn the camera off and
unplug the power cord from the outlet.
•
Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
•
Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
Using the Silicone Jacket
Putting the camera in Silicone Jacket SJ-DC1 (sold separately) protects it
from scratches. The jacket is submersible and can be used in seawater.
z
z
Insert the camera in the jacket in the
direction of the arrow.
z
z
To avoid scratching the camera, keep
dust and sand out of the jacket.
•
Be careful when inserting and removing the camera from the jacket.
Do not force it open, which may tear or damage it.
•
To avoid scratching the camera, always remove any dust or sand
that gets in the jacket.
•
After using the jacket in salt water or in dusty or sandy
environments, rinse it thoroughly under fresh water (such as tap
water) no warmer than 30 °C (86 °F) and dry it with a soft cloth.