Canon CR-2 - Manual (Page 29)

4 Basic Operations
29
Finishing an Examination
1
Save the images on the Rics NM 2 and end the examination.
The set lamp starts blinking and the observation monitor turns off.
CAUTION The main unit and the chin rest move to the center position when a study is finished with the
control software. Do not touch the main unit and the chin rest while they are moving.
2
Align the stage with the base and slide the stage lock
to LOCK side to lock the stage.
Align the mark on the stage lock and the mark on the right side
of the base.
3
Turn off the power to the CR-2.
4
Exit the Rics NM 2 and turn off the computer.