Canon CR-2 - Manual (Page 10)

10
2 Safety
WARNING
Prohibited
Do not use a power supply voltage other than that specified
on the rating label.
Do not use any power cord other than the one supplied.
Use the power voltage specified on the rating label. Otherwise, fire or electric shock
may result.
The supplied power cord is designed exclusively for this product. Do not use any
other power cord.
Prohibited
Do not plug or unplug the power plug with wet hands.
Do not plug or unplug the power plug or handle any other parts with wet hands.
Otherwise, fire or electric shock may result.
Unplug the plug periodically and remove any dust or dirt
around the plug and the AC outlet.
If the cord is kept plugged in for a long time in a dusty, humid or sooty environment,
dust around the plug will attract moisture, resulting in possible insulation failure that
may result in a fire.
Insert the power plug completely.
Insert the power plug completely into the AC outlet. If a pin of the power plug makes
contact with metal or any conductive object, fire or electric shock may result.
Prohibited
Do not clean the CR-2 with flammable solvent.
For safety reasons, before cleaning the CR-2, be sure to turn off the power of all the
devices and unplug the power cord from the AC outlet. Do not use alcohol, benzine,
thinner or any other flammable solvent.
Otherwise, fire or electric shock may result.
Turn off the power before inspection.
For safety reasons, before inspecting the instrument or cables, be sure to turn off
the power of all the devices.
Otherwise, electric shock may result.
Prohibited
Do not play the supplied CD-ROM in any CD player that does
not support data CD-ROMs.
Playing the CD-ROM in an audio CD player may damage the speaker. Playing the
CD-ROM in an audio CD player may also cause hearing loss if listened to with
headphones.
Be sure to turn off the power before moving the CR-2.
Before moving the CR-2, make sure that the power is turned off, the power
plug is removed from the AC outlet, and any cables that are connected to other
devices are disconnected.
Prohibited
Do not touch conductive parts of non-medical equipment and
the patient simultaneously.
Otherwise, electric shock may result.
Use an isolation transformer when this system is connected
to a network.
Connect an isolation transformer conforming to IEC 60601-1 for networks between
the computer and HUB.
Otherwise, there is a risk of electric shock if the network is faulty.