Canon CR-2 PLUS AF User Manual
Page 26
26
4 Basic Operations
1. Move the stage until the eye to be photographed appears on the observation monitor.
2. Adjust the center of the patient's pupil and the pupil alignment circles.
3. Have the patient stare at the green blinking internal eye fixation lamp.
Pupil alignment circles
During examination of the anterior segment of a patient who is extremely near- or far-sighted, the
patient may not be able to see the internal eye fixation lamp.
t To move the main unit slightly to the left or right, tilt the
operation lever to the left or right.
t To move the main unit slightly to the front or back, tilt the
operation lever to the front or back.
t To move the main unit up or down, turn the main unit
vertical movement ring.
When the vertical position cannot be fully adjusted by using the operation lever
Adjust the height of the chin rest with the CHIN REST button to raise or lower the patient's face.
2
Tilt the operation lever forward or backward to unify the top and bottom of the image of
the pupil.