Canon CR-2 PLUS AF - Manual (Page 15)

2 Safety
15
Environment of use
t Use, store, and transport the CR-2 Plus AF in an environment that is within the range of the
following conditions. Use the original packaging to store or ship it.
Temperature Humidity Atmospheric pressure
Environment of use 10 to 35°C 30 to 90% RH (no
condensation)
600 to 1060 hPa
Storage and transportation
environment
–30 to 50°C 10 to 95% RH (no
condensation)
600 to 1060 hPa
t Do not install, store, or leave the CR-2 Plus AF in a very hot or humid environment. Also, do not
use the CR-2 Plus AF outside. Doing so may cause a malfunction or misoperation.
t Always try to keep the room as clean as possible. After many years of usage, airborne dust in the
room may get on the objective lens as well as the optical parts in the main unit. You cannot take
good images if dust is on the equipment.
t When the CR-2 Plus AF is not being used, attach the objective lens cap and place the dust cover
over the CR-2 Plus AF.
Installation
t Request your sales representative or local Canon dealer to install the CR-2 Plus AF.
t A strong shock to the CR-2 Plus AF may put it out of alignment. Please handle the unit carefully.
Transportation
t Lower the main unit and chin rest to the bottom. To automatically lower them, turn on the power
while holding down the set button.
t Be sure to turn off the CR-2 Plus AF's power switch, remove the AC plug from the outlet, and
disconnect any cables connected to other equipment.
t When lifting the main unit, do not hold the head rest or digital camera. Hold the main unit by the
indentations for lifting at its front and rear, and keep it level.
t When transporting the CR-2 Plus AF, align the stage with the base, and then lock the stage with
the stage lock lever.
t The CR-2 Plus AF needs to be protected from vibration and shocks when it is transported in a
vehicle or over long distances. For details, contact your representative or local Canon dealer.