Safety precautions – Canon CR-2 PLUS AF User Manual
Page 10

10
2 Safety
Safety Precautions
To prevent injuries and data loss, operate the CR-2 Plus AF correctly by following the safety
precautions.
WARNING
To avoid the risk of electric shock, this equipment must only
be connected to a supply mains with protective earth.
Prohibited
Do not damage the power cord.
t Do not place anything heavy onto the power cord.
t Do not damage or modify the power cord.
t Do not forcibly bend, twist or pull the power cord.
t Do not hold the power cord when removing it from the AC outlet. Be sure to hold
the plug.
t Do not use an extension cable with the power cord. Connect the power cord
directly into the AC outlet.
Handle the power cord carefully. If the cord is damaged, contact your sales
representative or local Canon dealer. A damaged cord may result in fire or electric
shock.
Prohibited
Do not use a multiple socket outlet and an extension cable.
Connect the power cord directly into the AC outlet. Do not use a multiple socket
outlet and an extension cable with it.
Prohibited
Do not disassemble or modify.
A disassembled or modified instrument may result in fire or electric shock. Because
the CR-2 Plus AF incorporates high-voltage parts that may cause electric shocks,
touching them may cause death or serious injury.
Prohibited
Do not leave alcohol, thinner, or any flammable chemicals
near the instrument.
Do not place the CR-2 Plus AF near a flammable solvent. Fire may result if the
solvent spills or evaporates and makes contact with the internal electric parts. Some
disinfectants are flammable. Be sure to take precautions when using them.
Stop using immediately if there is an abnormality or problem.
If an abnormality occurs, immediately turn off the power and
disconnect the plugs on all devices.
t Smoke is emitted
t An unusual smell
t An unusual noise
t Foreign matter gets inside
t Devices are damaged.
Fire or electric shock may result if you continue using in such condition. Immediately
turn off the power of CR-2 Plus AF, unplug the power plug and turn off the power
of all connected devices. Then, contact your sales representative or local Canon
dealer immediately.
Prohibited
Do not place anything on top of the device.
Fire or electric shock may result if water or any other liquid or a needle, paper clip or
any foreign matter gets inside the CR-2 Plus AF.