Canon imagePROGRAF iPF815 - Manual (Page 391)

2.
Move the slider for each item to the left or right to adjust the settings.
Setting Details
Raster and Shaded/Rendered
Viewports Use these settings to adjust the balance between print quality, memory consump-
tion, and the print speed. If set to None, you cannot print raster images. Printing
time will take longer the higher you set the Best setting.
OLE Use these settings to adjust the balance between print quality, memory consump-
tion and the print speed when printing a OLE object. If set to None, you cannot
print OLE objects. Printing time will take longer the higher you set the Best set-
ting.
Trade-off Use these settings to lower the print quality by a certain degree if the print job can-
not be completed at the best quality.
3.
Click the OK button.
Merge Control Settings
Use thse settings to merge intersecting lines.
1.
Click the Merge Control below Graphics.
The Device and Document Settings sheet opens and switches to the Merge Control settings.
Setting Details
Lines Overwrite Where the lines intersect, the line that is printed last is visible, but the lines below it
are not visible.
Windows Software > HDI Driver >
iPF815 Graphics Settings
4
375