Brother MFC-3200C - Manual (Page 98)

10 - 2 R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X E S )
MFC3200C-US-FM6.0
4 If your pager requires a PIN, enter the PIN, press # , press Redial/Pause , enter
your MFC telephone number followed by # # , and then press Menu/Set .
For example , 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
— OR —
If you do not need a PIN, press Redial/Pause , enter the fax number of your
MFC followed by # #, and then press Menu/Set .
For example, Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
5
Press Stop/Exit .
Setting Fax Storage
If you set Fax Storage to ON , you will be able to retrieve fax messages from
another location using Fax Forwarding, Paging, or Remote Retrieval functions.
The LCD will indicate when you have a fax stored in memory.
1 Press Menu/Set , 2 , 5 , 2 . The LCD
prompts you to choose a fax setting.
2 Press to select ON (or OFF ),
and then press Menu/Set .
3
Press Stop/Exit .
Backup Print
If you’ve set FAX STORAGE to ON , your MFC automatically prints faxes as
they are received into memory. This is a safety feature in case the power goes
out so you won’t lose your messages.
You cannot change a Paging number or PIN remotely.
Note
Press Redial/Pause for each 3.5 second delay, as needed.
If there are faxes in memory when you
turn the Fax Storage
OFF , the LCD
prompts you to erase any faxes in
memory.
If you press
1 , all fax data is erased and Fax Storage is turned off. If you press
2 , data is not erased and Fax Storage remains on.
(See Printing a Fax in Memory , page 6-6.)
2 . F A X S T O R A G E
or
E R A S E A L L F A X ?
1 . Y E S 2 . N O