Brother HL-4070CDW - Manual (Page 56)

Installing the Printer Driver
54
STEP 2
Macintosh
®
Ma
ci
nt
osh
®
Wi
rel
es
s
Ne
two
rk
3
Choose Wireless Setup and Driver Install,
and then click Next.
4
Read the Important Notice and check the box
after you confirm this setting, and then click
Next.
5
Choose Manual and then click Next.
6
Choose I’m not able to connect my device to
my access point with a network cable and
then click Next.
7
If you choose This computer has wireless
capability., check I am using an access
point in infrastructure mode, and then click
Next. Go to
9.
If you are using a wired computer, choose This
computer uses a network cable to connect
to the wireless network., you must configure
the wireless settings from the control panel.
Click Next and see chapter 3 in the Network
User’s Guide on the CD-ROM.
If you have already completed the wireless
settings, click Next and go to step
8.
8
Check the box after you confirm that you have
completed the wireless settings, and then click
Next. Go to Installing the printer
driver on page 57.