Brother HL-4070CDW - Manual (Page 49)

Installing the Printer Driver
47
Macintosh
®
Ma
ci
nt
osh
®
Wi
rel
es
s
Ne
two
rk
11
Check the box after you confirm that you have
completed the wireless settings, and then click
Next.
Installing the printer driver
Improper Setup
• DO NOT try to cancel any of the screens during
this installation.
• If your wireless settings fail, and error
message will appear during the installation of
printer driver and the installation will be
terminated. If you encounter this failure,
please go to step
2 and setup the wireless
connection again.
12
The driver installation starts.
For Mac OS
®
X 10.3 or greater users:
Go to step
13.
For Mac OS
®
X 10.2.4 to 10.2.8 users:
Go to step
15.
13
The Brother software will search for the Brother
printer. During this time the following screen
will appear.
Note
If more than one printer is available, the following
list appears. Choose the printer you wish to
connect, and then click OK.
• If there is more than one of the same printer
model connected on your network, the
Ethernet address (MAC address) will be
displayed after the model name.
14
When this screen appears, click OK.
For Mac OS
®
X 10.3 or greater users:
Setup is now complete.
15
When this screen appears, click Add.
16
Make the following selection.
17
Choose your printer, and then click Add.
Note
If there is more than one of the same printer model
connected on your network, the Ethernet address
(MAC address) will be displayed after the model
name.