Brother HL-4070CDW - Manual (Page 37)

Installing the Printer Driver
35
Windows
®
W
indow
s
®
Wire
le
ss
Ne
tw
o
rk
Note
• For Windows Vista™, when the User Account
Control screen appears, click Allow.
• If you want to install the PS driver (Brother’s
BR-Script Driver), choose Custom setup and
then follow the on-screen instructions. When the
Select Components screen appears, check
PS(PostScript Emulation) Driver, and then
continue following the on-screen instructions.
3
Choose Wireless Setup and Driver Install,
and then click Next.
4
Read the Important Notice and check the box
after you confirm this setting, and then click
Next.
5
Choose Manual and then click Next.
6
Choose I’m not able to connect my device to
my access point with a network cable and
then click Next.
7
If you choose This computer has wireless
capability., check I am using an access
point in infrastructure mode, and then click
Next. Go to
9.
If you are using a wired computer, choose This
computer uses a network cable to connect
to the wireless network., you must configure
the wireless settings from the control panel.
Click Next and see chapter 3 in the Network
User’s Guide on the CD-ROM.
If you have already completed the wireless
settings, click Next and go to
8.
8
Check the box after you confirm that you have
completed the wireless settings, and then click
Next. Go to Installing the printer
driver on page 38.