Brother HL-4070CDW - Manual (Page 28)

Installing the Printer Driver
26
STEP 2
Windows
®
W
indow
s
®
Wire
le
ss
Ne
tw
o
rk
Using the SecureEasySetup™ software to configure your printer for a
wireless network
The SecureEasySetup™ software of Broadcom
Corporation is an easy way to configure your Brother
device to your wireless network settings. By pushing
a button on the wireless router or access point, you
can complete setup and secure the wireless network.
Your router or access point must also support
SecureEasySetup™. See the user’s guide for your
wireless LAN router or access point for instructions to
configure your printer for a wireless network.
Note
Routers or access points that support
SecureEasySetup™ have the
SecureEasySetup™ symbol as shown below.
1
Make sure that the printer power switch is on.
2
Click Install Printer Driver.
Note
Choose the Install Printer Driver icon for your
region.
3
Click Wireless Network users.
Note
• For Windows Vista™, when the User Account
Control screen appears, click Allow.
• If you want to install the PS driver (Brother’s
BR-Script Driver), choose Custom setup and
then follow the on-screen instructions. When the
Select Components screen appears, check
PS(PostScript Emulation) Driver, and then
continue following the on-screen instructions.
4
Choose Wireless Setup and Driver Install,
and then click Next.
5
Read the Important Notice and check the box
after you confirm this setting, and then click
Next.