Brother MFC 9560CDW - Manual (Page 78)

72
c
Tightly wring out a lint-free cloth soaked
in lukewarm water, and then wipe the
separator pad (1) of the paper tray with
it to remove dust.
d
Wipe the two pick-up rollers (1) inside of
the machine to remove dust.
e
Put the paper tray back in the machine.
f
Plug the machine’s power cord back into
the AC power outlet. Turn on the
machine’s power switch.
Calibration
A
The output density for each color may vary
depending on the environment the machine is
in such as temperature and humidity.
Calibration helps you to improve the color
density.
a
Press Menu, 4, 6.
b
Press a or b to select Calibrate.
c
Press OK.
d
Press 1 to select Yes.
e
Press Stop/Exit.
You can reset the calibration parameters
back to those set at the factory.
a
Press Menu, 4, 6.
b
Press a or b to Reset.
c
Press OK.
d
Press 1 to select Yes.
e
Press Stop/Exit.
1
1