Brother MFC 9560CDW - Manual (Page 75)

Routine maintenance
69
A
j
Turn the drum unit gear toward you by
hand while looking at the surface of the
suspected area.
k
When you have found the mark on the
drum that matches the drum dot check
sheet, wipe the surface of the drum
gently with a cotton swab until the mark
on the surface comes off.
IMPORTANT
DO NOT clean the surface of the
photosensitive drum with a sharp object.
l
Turn the drum unit over by holding the
green handles.
m
Hold the handle of the toner cartridge
and slide the toner cartridge into the
drum unit, then slightly pull it toward you
until you hear it click into place. Make
sure that you match the toner cartridge
color to the same color label on the drum
unit. Repeat this for all the toner
cartridges.
C - Cyan M - Magenta
Y - Yellow K - Black
C
M
Y
K