Brother MFC-J4710DW - Manual (Page 69)

Receiving a fax
55
5
Using Receive Modes
5
Some Receive Modes answer automatically
(Fax Only and Fax/Tel). You may want to
change the Ring Delay before using these
modes. (See Ring Delay on page 56.)
Fax Only
5
Fax Only mode will automatically answer
every call as a fax call.
Fax/Tel
5
Fax/Tel mode helps you automatically
manage incoming calls by recognizing
whether they are fax or voice calls and
handling them in one of the following ways:
 Faxes will be automatically received.
 Voice calls will start the F/T Ring to tell you
to pick up the line. The F/T Ring is a fast
pseudo/double-ring made by your
machine.
(Also see F/T Ring Time (Fax/Tel mode only)
on page 56 and Ring Delay on page 56.)
Manual
5
Manual mode turns off all automatic
answering functions unless you are using the
Distinctive Ring feature.
To receive a fax in Manual mode, lift the
handset of the external telephone or press
Hook. When you hear fax tones (short
repeating beeps), press Fax Start and
choose Receive. You can also use the Easy
Receive feature to receive faxes by lifting a
handset on the same line as the machine.
(Also see Easy Receive on page 57.)
External TAD
5
External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be handled in one of
the following ways:
 Faxes will be automatically received.
 Voice callers can record a message on the
external TAD.
(For more information, see Connecting an
external TAD (telephone answering device)
on page 65.)