Brother MFC-J4710DW - Manual (Page 63)

Sending a fax
49
4
c
You can change the following
fax-sending settings. Press Options.
Swipe up or down, or press a or b to
scroll through the fax settings. When the
setting you want is displayed, press it
and choose your new option. When you
are finished changing the options, press
OK.
(Basic User’s Guide)
For details about changing the following
fax-sending settings, see pages 50 to
52.
 Glass Scan Size
 Color Fax Transmission
 Preview Outgoing Fax
 Transmission Verification Report
(Setup)
(Advanced User’s Guide)
For more advanced fax-sending
operations and settings
(See Advanced User’s Guide: Sending
a fax.)
 Contrast
 Fax Resolution
 Set New Defaults
 Factory Reset
 2-sided Fax (MFC-J4710DW)
 Faxing at the end of a call
 Broadcasting
 Real Time Transmission
 Overseas Mode
 Delayed Fax
 Batch Transmission
 Canceling Waiting Jobs
 Polled Transmit
d
Enter the fax number.
Using the dial pad
Using Address Book
 Address Book
Using call history
 Outgoing Call
 Caller ID history
NOTE
• You can preview a fax message before
sending it by setting Preview to On. (See
How to preview an outgoing fax
on page 51.)
• If your network supports the LDAP
protocol you can search for fax numbers
and E-mail addresses on your server.
(See Network User’s Guide: LDAP
operation.)
e
Press Fax Start.
Faxing from the ADF
4
 The machine starts scanning and
sending the document.
Faxing from the scanner glass
4
 If you choose Black in the
Color Setting (default setting),
the machine starts scanning the first
page. Go to step f.
 If you choose Color in the
Color Setting, the Touchscreen
asks if you want to send a color fax.
Press Yes (Color fax) to
confirm. The machine starts dialing
and sending the document.