Setting the ready screen, Basic operations, Setting the ready screen basic operations – Brother MFC-J4710DW User Manual
Page 26

Chapter 1
12
Setting the Ready screen
1
You can set the Ready screen to either Home,
More, Shortcuts 1, Shortcuts 2 or
Shortcuts 3.
When the machine is idle or you press
,
the machine will go back to the screen that
you have set.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display General Setup.
d
Press General Setup.
e
Swipe up or down, or press a or b to
display Button Settings.
f
Press Button Settings.
g
Press Home Button Settings.
h
Swipe up or down, or press a or b to
display Home, More, Shortcuts 1,
Shortcuts 2 or Shortcuts 3, and
then press the option you want.
i
Press .
The machine will go to the Home screen
that you have set.
Basic Operations
1
To operate the Touchscreen LCD, press your
finger on the Touchscreen to operate it. To
display and access all the screen menus or
options, swipe left, right, up, down, or press d
c
or a b to scroll through them.
IMPORTANT
DO NOT press the Touchscreen with a
sharp object, such as a pen or stylus. It
may damage the machine.
The following steps show how to change a
setting in the machine. In this example, the
Receive Mode setting is changed from
Fax Only to Fax/Tel.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Swipe up or down, or press a or b to
display Receive Mode.
f
Press Receive Mode.