Brother MFC-J4710DW - Manual (Page 64)

Chapter 4
50
f
When the Touchscreen asks you
Next page?, do one of the following:
 To send a single page, press No.
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
Stop faxing
4
To stop faxing, press .
Setting scanner glass size for
faxing
4
When documents are A4 size, you need to
set the Scan Size to A4. If you do not, the
bottom portion of the faxes will be missing.
a
Load your document.
b
Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
c
Press Options.
d
Swipe up or down, or press a or b to
display Glass Scan Size.
e
Press Glass Scan Size.
f
Press A4 (or Letter).
g
Press OK.
h
Enter the fax number.
i
Press Fax Start.
NOTE
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User’s Guide: Setting
your changes as the new default.)
• This setting is only available for sending
documents from the scanner glass.
Color fax transmission
4
Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine’s
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
a
Load your document.
b
Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
c
Press Options.
d
Swipe up or down, or press a or b to
display Color Setting.
e
Press Color Setting.
f
Press Color.
g
Press OK.
h
Enter the fax number.
i
Press Fax Start.
Canceling a fax in progress
4
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
.