Brother PT-P750W - Manual (Page 9)

Printing from Computers
4
2
Installing P-touch Editor and the Printer Driver
2
When Printing via a USB Connection
2
To print from your computer, you must install P-touch Editor, the printer driver, and other applications to your
computer.
Visit our website described below and download the necessary software. The installation instructions are
available on the download page.
 For Windows
®
: http://www.brother.com/inst/
 For Macintosh: The [Downloads] page on the Brother Solutions Center (http://support.brother.com/)
When Printing via a Wireless Network Connection
2
Note
If the P-touch labeler is powered by alkaline or Ni-MH batteries, you cannot establish a wireless network
connection. Use the rechargeable Li-ion battery or the AC adapter.
When you want to print via a wireless network connection, it is recommended that you configure the wireless
network settings while installing the application.
You can change the wireless network settings later using the Printer Setting Tool. (For Windows
®
only)
For more information, see Printer Setting Tool (for Windows
®
) on page 19.
The following installation methods are available.
Visit our website described below and download the necessary software. The installation instructions are
available on the download page.
 For Windows
®
: http://www.brother.com/inst/
 For Macintosh: The [Downloads] page on the Brother Solutions Center (http://support.brother.com/)
Wireless configuration temporarily using a USB cable
2
It is recommended that you use a computer wirelessly connected to your network for this method.
You can remotely configure the P-touch labeler from the computer on the network using a USB cable.
One-push configuration using WPS (Wi-Fi Protected Setup™)
2
You can use WPS to configure your wireless network settings quickly, if your WLAN access point/router
supports WPS.