Brother PT-P750W - Manual (Page 49)

Printing Labels Distributed to Multiple Printers
44
8
e
Specify the tape width to be used for printing.
A. If only one printer has been selected
8
In the dialog box from step d, select the printer whose setting is to be specified, and then either
double-click it or right-click it and click [Settings]. From the [Set Width] drop-down list, select the tape
width.
Note
Information to be displayed in the dialog box from step d can be entered in the [Notes] text box.
B. If multiple printers have been selected
8
In the dialog box from step d, select the printers whose setting are to be specified, and right-click them
and click [Settings]. From the [Set Width] drop-down list, select the tape width. The same tape width
setting is applied to all selected printers.
Note
The settings below [Printer Settings] and [Notes] are not available.
f Click [OK] to close the tape width setting window.