Brother PT-P750W - Manual (Page 51)

46
A
A
Routine Maintenance
A
Your P-touch labeler should be cleaned on a regular basis to maintain its performance.
Note
Always disconnect the AC adapter before cleaning your P-touch labeler.
Cleaning the Exterior of Your P-touch Labeler
A
Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly dampened cloth with water on difficult to remove marks.
Important
Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform the case or
damage the appearance of your P-touch labeler.
Cleaning the Print Head and Head Roller
A
Streaks or poor quality characters on printed labels generally indicates that the print head and head roller is
dirty. Clean the print head using a dry cotton swab or optional print head cleaning cassette (TZe-CL4).
Note
See the instructions provided with the print head cleaning cassette for directions on how to use it.
WARNING
Do not touch the print head directly with your bare hands. The print head may be hot.
Appendix
A