Brother QL-650TD - Manual (Page 40)

STEP2 Creating and printing a label 40
There are three options, cutting after each label, not cutting labels, or cutting the last
label only.
When selecting other than "English - US", the unit is "mm". If you want to use "inch",
refer to Î "Setting the unit of measure (inch or mm): Menu 10".
1
Press the Menu button in Time Display mode.
Menu Selection mode is displayed.
2
Press the up or down arrow buttons
( / ) to select "Auto cut" and press OK
button.
3
Select a function you want to use using
the up or down arrow buttons ( / ) and
press OK button.
The setting is saved and the screen returns to
Time Display mode.
Function Description
Auto Cut
Cuts each label after printing.
OFF
Does not cut labels.
Cut at End
Cuts only the last label printed.
1
Press the Menu button in Time Display mode.
Menu Selection mode is displayed.
2
Select "Menu 9" using the up or down
arrow buttons ( / ) and press OK
button.
3
Select the language using the up or down
arrow buttons ( / ) and press OK
button.
The setting is saved and the screen returns to
Time Display mode.
Setting the cut options: Menu 8
Menu 8/12
Auto Cut
Auto Cut
Auto Cut
001 002 003 004
001 002 003 004 005 006 ...
001 002 003 004
Setting the language: Menu 9
Menu 9/12
Language
Language
English - US