Brother QL-650TD - Manual (Page 22)

STEP1 Before using the printer 22
Name Function
ON/OFF button
( )
Turns ON/OFF the printer. The ON/OFF button includes a LED light, which
indicates the printer status. Below are the status LED indications:
Print button Starts printing.
Cut button
Cuts the printed label. This button is used when "Auto Cut" is set to "OFF".
For details, refer to Î"Setting the cut options: Menu 8" in page 40.
Feed button
•
When using DK Labels (pre-cut labels), feeds the DK Label to the edge of
label.
When pressing this button more than one second, the DK Label is fed to the
next label.
•
When using DK Tape (Continuous tape), feeds DK Tape by 1" (25.4mm).
•
When the DK Roll is not set, this printer enters cleaning mode and the roller
spins by 1/3" (8 mm). When pressing this button for more than one second,
the roller spins by 4" (10 cm).
Menu button
Switches between Time Display mode and Menu Selection mode
In order to avoid changing the template setting mistakenly, the Menu
button can be locked. For details, refer to Î"Locking the Menu button" in
page 42.
Cancel button Cancels the current setting and returns to the previous mode or screen
OK button Accepts the mode or setting entered
Up/down arrow
button ( / )
Changes the menu or setting
Manual Operation Button Functions
LED lamp Status
Not lit
Power is OFF
Lit
Power is ON
Blinks rapidly
An error has occurred.
For details on troubleshooting, refer to
Î "Troubleshooting" in page 54.
Blinks slowly
The printer is processing information.
Turns OFF after
blinking 10 times
A system error has occurred.
Turn the QL-650TD off and then on again.
If this error re-occurs, contact the retail outlet where the
QL-650TD was purchased or contact Brother Customer
Service at 1-877-BROTHER.