Configuring the network pc-fax receiving settings – Brother MFC-640CW User Manual
Page 99
Brother PC-FAX Software (For MFC models only)
93
Configuring the Network PC-FAX Receiving Settings
6
The settings to send received faxes to your computer were automatically configured during the installation of
MFL-Pro Suite (See the Quick Setup Guide).
If you are using a different machine to the one that was registered to your PC during the installation of the
MFL-Pro Suite software, follow the steps below.
a
In the PC-FAX RX Setup dialogue box, click the Network Settings button. The Network Settings
dialog box appears.
b
You must specify the IP address or name of your machine.
Choose the appropriate connection method.
Specify your machine by address
6
1
Enter the IP address of the machine in IP Address.
Specify your machine by name
6
1
Enter the machine node name in Node Name, or click the Browse button and choose the correct
Brother machine you want to use from the list.
Specify your PC name
6
1
You can specify the PC name that will appear on the display of the machine. To change the name,
enter the new name in Display Your PC Name.