Accessing the scanner – Brother MFC-640CW User Manual
Page 30
Scanning
24
Accessing the Scanner
2
a
Start the ScanSoft
®
PaperPort
®
9.0SE software that was installed during the MFL-Pro Suite installation
to scan a document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft
®
PaperPort
®
9.0SE. The
scanning steps may vary when using other software applications.
b
Click File, then Scan. Or click the Scan button.
The Scan panel appears in the left side of the screen.
c
Choose the scanner you are using from the Scanner drop-down list.
Note
• For Windows
®
XP:
Choose TW-Brother MFC-XXXX USB or TW-Brother MFC-XXXX LAN.
• For other operatin systems:
Choose Brother MFC-XXXX USB or Brother MFC-XXXX LAN.
(Where XXXX is your model name)
d
Click Scan.
The Scanner Setup dialog box appears: