Brother MFC-640CW - Manual (Page 150)

144
11
Note
Available for Mac OS
®
X 10.2.4 or greater.
If you want to scan from the machine on a network, you must choose the networked machine in the
DeviceSelector application located in Macintosh HD/Library/Printers/Brother/Utilities or from the Model
pop-up menu in the main screen of ControlCenter2. If you already installed the MFL-Pro Software following
the network installation steps in the Quick Setup Guide then this selection should already be made.
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the control panel. (See the Network User’s Guide on the CD-ROM.)
Note
For network scanning, maximum 25 clients can be connected to one machine on a network. For example,
if 30 clients try to connect at a time, 5 clients will not be shown on the LCD.
Before using Network Scanning
11
Configuring network scanning
11
a From Library, choose Printers, Brother, Utilities and DeviceSelector, and then double-click
DeviceSelector.
The DeviceSelector window appears. This window can also be opened from ControlCenter2.
Note
ControlCenter2 is not available for Mac OS ® 9.1-9.2.
b
Choose network from the Connection Type pop-up menu.
Network Scanning
(For models with built-in network support)
11