Sequence, Command name, Description/example – Brother QL-700 User Manual
Page 6: Raster graphics transfer, 67h, 00h, 5ah, 00h, 0fh, ffh (repeat for 86 bytes), F0h, 00h (ql-500/550/560/570/580n/650td), F0h, 00h (ql-1050/1060n), Print command, 0c h, Print command with feeding
③ Page data
Repeat for each page in the print job.
Sequence
Command Name
Description/Example
－
Raster graphics transfer
Sends a raster line that contains data with a pixel set to
“ON”.
For a single perpendicular line on 62-mm-wide
continuous length tape:
67H, 00H, 5AH, 00H, 0FH, FFH (repeat for 86 bytes),
F0H, 00H (QL-500/550/560/570/580N/650TD)
67H, 00H, 5AH, 00H, 0FH, FFH (repeat for 168 bytes),
F0H, 00H (QL-1050/1060N)
④ Print command
Specified at the end of the page.
Sequence
Command Name
Description/Example
－
Print command
Specified at the end of a page that is not the last page.
0C H
－
Print command with
feeding
Specified at the end of the last page. 1A H
3.2.Page data details
3.2.1. Resolution
Resolution
Height-to-Width
Proportion
300 dpi high, 300 dpi wide
1:1
600 dpi high, 300 dpi wide
2:1
Brother QL-500/550/560/570/580N/650TD/700/1050/1060N Command Reference
5