Brother QL-700 - Manual (Page 24)

Name Raster graphics transfer
Syntax g + {s} + {n} + {d1} + ... + {dn}
67 H + {s} + {n} + {d1} + ... + {dn}
Description {s} The definition of raster information s is as follows.
s 0x0: Data transmission
0x1～0xFE: Not used
0xFF: Indicates that data transmission should be stopped.
{n} Transfers the specified number of bytes (n) of data. (However, this changes if the
data is compressed using the serial interface.)
n=90 (QL-500/550/560/570/580N/650TD/700)
n=162 (QL-1050/1060N)
{d1-dn} Print data.
Name Zero raster graphics
Syntax Z
5A H
Description Raster line is filled in zero data. (Compression mode)
Name Print command
Syntax FF
0C H
Description Used as a print command, except for the last label when multiple labels are printed.
Name Print command with feeding
Syntax Control-Z
1A H
Description Used as a print command for the last label when multiple labels are printed.
Name Baud rate setting (QL-580N/650TD/1050/1060N)
Syntax ESC + i + B + {n1} + {n2}
1B H + 69 H + 42H + {n1} + {n2}
Description This changes the communications baud rate for the main unit. The factory setting is
115200 bps
Definition of {n1} and {n2}
Setting = n1 + n2 * 256
Setting: 96=9600 bps, 576=57600 bps, 1152=115200 bps
Brother QL-500/550/560/570/580N/650TD/700/1050/1060N Command Reference
23