Blue-White FLEX-PRO A2 ProSeries Peristaltic Pump - Manual (Page 25)

Page 25 Flex-Pro
Step 5
Number of pulses to trigger pump start will be displayed.
To increase value, press and release UP arrow.
To decrease value, press and release DOWN arrow.
To save value, press and release RIGHT arrow.
Mode 4
Step 7
To exit Setup, press and hold SELECT RUN MODE button
for a few seconds until you return to Run screen.
4
Step 6
Pump speed during on-time will now be displayed.
Pump will run at this speed after selected number of pulses
is reached from previous menu.
To increase value, press and release UP arrow.
To decrease value, press and release DOWN arrow.
To save value, press and release RIGHT arrow.
1
Mode 4
Mode 4
OFF
4
0%
Output
100%
Output
Hz
ON
4
1.0
Hz
ON
SPEED
Hz
ON
11.0 Mode 4 - Pulse Batch (low speed pulse) Operation - Continued
Runtime Screen Shot 1
Mode 4
11.1 Mode 4 - Pulse Batch Operation Screen Shots
Runtime Screen Shot 2
Mode 4
2
Hz
4
Display motor speed percentage.
Pump Running in Pulse Batch Operation
Display current number of pulses received
Press and release RIGHT arrow to view number of pulses
received in real-time.
35.0
SPEED
4
Runtime Screen Shot 3
Mode 4
9.6
mA
4 Press and release RIGHT arrow again to view mA output
value in real-time
(available on select models only) .
Press and release RIGHT arrow again to view motor
speed percentage, as in Screen Shot 1.
OUT