Blue-White Star System with C-1500N Diaphragm Pump - Manual

Installation Instructions
10/05/2011
q
STAR SYSTEM
Pump Installation
1. Install the mounting bracket to the back of the pump using one of the
black phillips head screws.
2. Tighten the other two black phillips head screws into the tank wall inserts.
3. Secure the pump to the tank by slipping the mounting bracket of the
pump over the screws on the tank wall.
Suction Tube Installation
1. Attach the bottom of the flow indicator assembly to the footvalve. Tighten
down the tube nut to the footvalve neck. Make sure the arrow and the
face of the flow indicator assembly are facing upward in the direction of
flow.
2. Attached the top of the flow indicator assembly to the bottom cartridge
valve of the pump head. Tighten the tube nut to the cartridge valve.
3. Make sure all tube nuts are securely tightened (hand tighten only).
5300 Business Drive
Huntington Beach, CA 92649
USA
Phone: 714-893-8529 FAX: 714-894-9492
E mail: [email protected] or [email protected]
Website: www.blue-white.com
Blue-White
Industries, Ltd.
R
80000-213