308/nicor in-line connectors – Badger Meter ORION Classic (CE) User Manual
Page 8
ORION® Water Endpoints
308/Nicor In-line Connectors
An in-line connector is an optional feature that allows connectivity to AMR/AMI devices without the need for a field splice
kit . When the endpoint and encoder have Badger Meter connectors, connect the male and female connector ends . The
connectors go together easily with the proper orientation .
•
With 308 connectors, align the notch on the female end with the corresponding projection on the male end (See
308
Connector, Figure 2
) and push the ends together for the correct fit .
•
With Nicor connectors, align the arrows on the connectors (See
Nicor Connector, Figure 2
) and push the male and
female ends together .
You will hear a “click“ when the ends are firmly seated and the connection is secure .
Female end
Male end
308 Connector
Nicor Connector
Figure 2: In-line connectors
Notch
Projection
Arrows
Male end
Female end
Page 8
June 2014