Badger Meter ORION Classic (CE) - Manual (Page 23)

Installation Manual
IR Programming Bracket (Optional)
To hold the IR programming head in place while performing IR functions on ORION endpoints, an optional IR Programming
Bracket (67625-001) is available for use with the remote box enclosure . The programming bracket slides into the adapter
rails on the bottom of the remote box enclosure to correctly align the optical head of the IR programming cable with the
endpoint LED port .
1 . Slip the optical head of the IR programming cable into the top of the bracket with the nubs on the head fitted into
the cutouts on the bracket .
Optical head of the IR programming cable
Bracket (67625-001) for the optical head
Optical head inserted into bracket
Figure 17: Optical head and bracket
Page 23 June 2014