Badger Meter ORION Classic (CE) - Manual (Page 20)

ORION® Water Endpoints
REMOTE INSTALLATION
Remote Wall Mount Box Enclosure
The ORION Remote Wall Mount Box Enclosure Kit (66009-004) can be used for remote mounting applications . The wall
mounted remote box enclosure is designed for mounting ORION endpoints in indoor or outdoor environments, and also
provides an environmentally protected area for gel splice connections (if needed) to be maintained inside the enclosure .
The ORION Remote Wall Mount Box Enclosure Kit is recommended for proper mounting of the ORION endpoint for
remote applications .
Remote Box Enclosure
ORION CE RTR Endpoint
Figure 12: Enclosure and endpoint
To install an ORION endpoint using the remote box enclosure, follow these steps .
1 . Flip over the remote box enclosure and look inside to verify the proper orientation . The bottom is identified by the
hole in the bottom of the enclosure that allows access to the endpoint IR communication port without having to
disassemble the unit and the IR head holder rails ( "Figure 13: Remote box enclosure mounting" on page 21 ) .
Page 20 June 2014