West Control Solutions MRC 8000 - Manual (Page 31)

31
Output 2 Action
on Error Condition
(If out2 = 0,1,2,7 then
P2EC will not be displayed)
33 Pen Action on PAEC 0 or 1 1
Error Condition 0 = Pen goes to 0 % of chart
1 = Pen goes to 100 % of chart
Pressing the SCROLL key with the PAEC parameter value displayed in the Pen 1 window will
advance the display of a single pen instrument to the unit parameters. Pressing the SCROLL
key with the PAEC parameter displayed in the Pen 1 window of a two pen instrument will
advance the display to be PEns in the Pen 2 window. The Pen 2 Program mode parameter
selections can be made now. Pressing the SCROLL key with the PAEC parameter value
displayed in the Pen 2 window will cause the display to advance to the unit parameters
displayed in the Pen 1 window.
UNIT PARAMETERS
34 Relay A Assignment rLyA 0 to 8 0
1=Assigned to Alarm 1-Pen 1
2=Assigned to Alarm 2-Pen 1
3=Assigned to Alarm 1-Pen 2
4=Assigned to Alarm 2-Pen 2
5=Assigned to Output 1-Pen 1*
6=Assigned to Output 2-Pen 1*
7=Assigned to Output 1-Pen 2*
8=Assigned to Output 2-Pen 2*
35 Relay B Assignment rLyb Same selection as rLyA 0
36 Relay C Assignment rLyC Same selection as rLyA 0
37 Relay D Assignment rLyd Same selection as rLyA 0
38 Current Output A CurA 0 to 6 0
Assignment 0=Not Assigned
1=Assigned to Process
Value Output-Pen 1
2=Assigned to Process
Value Output-Pen 2
3=Assigned to Output 1-Pen 1*
4=Assigned to Output 2-Pen 1*
5=Assigned to Output1-Pen 2*
6=Assigned to Output 2-Pen 2*
39 Current Output B Curb Same selection as CurA 0
Assignment
40 Current Output A CoAr 0 to 1 1
Range 0=0-20 mA
1=4-20 mA
41 Current Output B Cobr Same selection as CoAr 1
Range
42 Chart Rotation Time Crt 0.1 to 999.9 hours per 1.0
rotation
43 Pen Action on Power Up PAPu 0=Pen(s) go to the "home" 0
posistion (toward chart
cetner) when powered up
1=Pen(s) remain in last
position prior to power down
DISPLAY AVAILABLE FACTORY YOUR
STEP DESCRIPTION CODES SETTINGS SETTING SETTING