Thermo Fisher Scientific EcoScan Salt 6 - Manual (Page 4)

TABLE OF CONTENTS
1 INTRODUCTION 1
2 DISPLAY & KEYPAD FUNCTIONS 3
2.1 Display 3
2.2 Keypad 4
3 PREPARATION 5
3.1 Inserting & Removing Rubber Boot 5
3.2 Inserting the Batteries 5
3.3 Battery Replacement 6
3.4 Conductivity Electrode Information 6
3.5 Connecting the Probe to Meter 8
3.6 Switching the Meter On 9
3.7 Change Salinity ÙTemperature Measurement Mode 10
4 CALIBRATION 11
4.1 Important Information on Meter Calibration 11
4.2 Preparing the Meter for Calibration 12
4.3 Calibration for Salinity (% or ppt) 13
4.4 Temperature Calibration 14
5 MEASUREMENT 15
5.1 With Automatic Temperature Compensation (ATC) 15
5.2 Without ATC (Manual Temperature Compensation) 16
5.3 Taking Measurements 17
5.4 HOLD Function 18
6 ADVANCED SETUP FUNCTIONS 19
6.1 Advanced Setup Overview 19
6.2 Temperature Coefficient 21
6.3 Normalization Temperature 22
6.4 Selection of ppt or PrSn. (Default being PrSn) 23
6.5 Restore Factory Default Values 24
7 PROBE CARE AND MAINTENANCE 25
8 TROUBLE-SHOOTING GUIDE 26
9 ERROR MESSAGES 27
10 SPECIFICATIONS 29
11 ACCESSORIES 30
12 ADDENDUM 1: CALIBRATION TIPS 31
13 WARRANTY 32
14 RETURN OF ITEMS 33