beautypg.com

Addendum 1: calibration tips, 12 addendum 1: calibration tips – Thermo Fisher Scientific EcoScan Salt 6 User Manual

Page 35

background image

Instruction Manual Salt 6

31

12 ADDENDUM 1: CALIBRATION TIPS

You only need one calibration for measurement throughout the entire range of
the meter.

Wet the probe for 10 minutes before calibrating or taking readings to saturate
the probe surface and minimize drift. If you make measurements at extreme
temperatures, calibrate the meter at least once a week.

You should only use the conductivity probe specified for this meter. These
probes have a built-in temperature sensor. If you use a different probe without a
temperature sensor, you must measure the solution temperature separately and
manually enter the solution temperature.