Thermo Fisher Scientific EcoScan Salt 6 - Manual (Page 27)

Instruction Manual Salt 6
23
Selection of ppt or PrSn. (Default being PrSn)
Choose to have your measurement reading in ppt or percentage (PrSn).
1) Enter the advanced setup as
described in Section 6.1.
HOLD
ENTER
CAL
HOLD
ENTER
2) Press ▲ or ▼ key until [SAlt]
appears on the LCD. Press ENTER
key.
3) Press ▲ or ▼ key to select either
[PrSn] or [PPt].
4) Press
ENTER
key to select. The
meter will take you back to the
menu, [SAlt].
5) Press ▲ or ▼ key to move to the
next menu or press CAL to exit to
measurement mode.