Revo RE8/16DVR1 - Manual (Page 29)

Digital Video Recorder
21
Highlight Use REVO Remote Service and press the
button to toggle between On and Off. See Appendix – REVO
Remote for detailed descriptions of the REVO Remote service.
Highlight the box beside Port and press the button. Set
the port number used when accessing REVO Remote by using
the Up and Down arrow buttons to increase or decrease the
numbers.
Figure 21 — REVO Remote setup screen.
Notification
The DVR can be set up to send an email or to contact a computer running REVO Remote Pro (Remote Administration
System) when an event occurs.
Highlight Notification in the Network menu and press the button. The Notification screen displays. You will be
able to change the Mail and Callback settings.
Figure 22 — Notification Mail setup screen.
Highlight Enable and press the button to toggle between
On and Off. You will only be able to change the settings if
Mail is enabled.
Highlight the box beside SMTP Server and press the
button. A virtual keyboard appears that you can use to enter
the IP address or domain name of the SMTP server.
NOTE: You will need to get the IP Address or domain
name of the SMTP Server from your network
administrator.
NOTE: You can use the domain name instead of IP address
if you already set up the DNS Server when setting
up the LAN.
Highlight the box beside Port and press the
button. Use the arrow buttons to enter the SMTP Server port number
obtained from your system administrator. The default port number is 25.
Highlight Use SSL/TLS and press the button to toggle between On and Off. When it is On, the DVR can send an
email via an SMTP server requiring SSL (Secure Sockets Layer) authentication.
Highlight the box beside Authentication and press the button. An
Authentication screen appears. Highlight Use and press the
button to
toggle between On and Off. Highlight the box beside User/Password and
press the
button. A virtual keyboard appears allowing you to enter the user
ID and password.
Highlight the box beside Sender and enter the sender’s e-mail address. Use the virtual keyboard to enter the e-mail
address.
NOTE: The e-mail address must include the “@” character to be a valid address.
Highlight the box beside Recipient and enter the recipient’s e-mail address. Use the virtual keyboard to enter the
e-mail address.
Highlight the Test box and press the button to test emailing with the current settings you made.