Agilent Technologies E5810A - Manual (Page 121)

Chapter 4 121
Troubleshooting Information
Checking PC Client Connections
Checking syslog Messages
The syslog messages can be viewed by typing
/systemLog.htm
on your web browser, where
is the IP address of the E5810. For example, if the
IP address of the E5810 is 169.254.58.10, type
http://169.254.58.10/systemLog.htm
to display the message
table.
Typical Display The syslog file messages can also be viewed via the Telnet
syslog-display
command (see Appendix B , “Using the Telnet Utility”). A
typical display (with time from power-on in parentheses) follows.