KROHNE OPTISONIC 7060 EN - Manual (Page 19)

OPTISONIC 7060
Electrical & mechanical installation manual 730962.31.00 page 19 of 52
3 Assembly and Installation
3.1 General Notes
3.1.1 Delivery
The OPTISONIC 7060 is delivered in a pre-assembled condition in robust packaging. When
unpacking the device,
check for possible damage in transit. Pay particular attention to the interior of the meter
body, any visible transducer components and the sealing surfaces of the flanges. Any
damage must be documented and reported to the manufacturer immediately.
Also check the consignment for completeness. The standard scope of delivery comprises:
¾ OPTISONIC 7060 measuring system (meter body with CONVERTER and transducers)
¾ Operating instructions (this document)
¾ Documentation CD
¾ Certificates
– OPTISONIC 7060 manufacturer information
– EC Declaration of Conformity
Important
Make sure the actual site conditions match the information provided on the labels at the
converter (see Fig. 3.1), in order to guarantee a safe operation of the measuring
equipment.
Fig. 3.1: OPTISONIC 7060 type plate label
IMPORTANT