KROHNE OPTISONIC 7060 EN - Manual (Page 15)

OPTISONIC 7060
Electrical & mechanical installation manual 730962.31.00 page 15 of 52
The digital output 2 is assigned at the factory with the status signal “Check requested”, and
digital output 3 the status signal “Direction of flow”.
As a standard, the LCD shows the two major counters, one for each direction of flow.
Changes in the logbook status are indicated by a flashing character at the far right end of
the first line of the display. The character depends on the status:
• “I” for information
• “W” for warning
• “E” for error
The character will disappear after acknowledgement. For details on reading the logbook
contents, acknowledgement and menu structure, refer to Section 8.2.4.