Jenway 73 Series PC software - Manual (Page 55)

55
7.1.6 Selecting concentration units
The units of concentration can be
selected from a number of options:
no units, %, ppm, EBC, SRM,
mEq/l, mEq, M, mM, µM, nM, U,
U/l, U/ml, g/l, mg/l, µg/l, ng/l, g/dl,
mg/dl, µg/dl, mg/ml, µg/ml, ng/ml,
µg/µl, ng/µl, mol/l, mmol/l. Click on
the arrow on the drop down box to
select the units required.
7.1.7 Operating mode
The results displayed can be either
absorbance or % transmittance. To
select absorbance click in the circle
adjacent to Absorbance; to select
transmittance click in the circle
adjacent to Transmittance.
After the kinetics run is completed it
is possible to go back and change
the operating mode. This will
automatically adjust the graph scale
and the results table.