Jenway 73 Series PC software - Manual (Page 20)

20
4.1.1 Batch name
The batch name entered here
will be reflected on the name
tab at the bottom of the screen
and under sample name in the
results table once results have
been generated.
4.1.2 Setting the wavelength
To select the wavelength that the
zero calibration and sample
measurements will be performed
at type the wavelength into the
text box. If a value entered is
outside of the range of the
spectrophotometer an error icon
will be displayed and this must be
corrected before the settings
screen can be exited. Only
numeric values can be entered.