Jenway 7315 Manual Italian - Manual (Page 55)

55
The result will be displayed on the screen.
The information displayed is specific to the measurement
mode which the result was generated and saved in.
Use the keys below the
arrow icons to display more
information.
When opening a spectrum or kinetics result the result
can be viewed graphically on an axis or as a text file. To
view the result graphically press the key adjacent to the
axis icon. To view the result as a text file press the key
adjacent to the
ABC icon.
10.6 DeLetinG ReSULtS
Results can only be deleted if a valid USB memory stick is inserted into the front of the instrument.
In the expanded operating menu press the key adjacent to
the
USB memory stick icon to open the results selection
menu. Select the result to be deleted by pressing the key
adjacent to the result. Press the key below the
delete
icon.
Confirmation will be needed to delete the selected result;
press the key adjacent to the
tick icon to confirm deletion.
Press the key adjacent to the cross icon to cancel and
return to the results selection menu.
10.7 PRintinG
The utility toolbar in the expanded operating menu
enables results to be printed and print setup options to
be set. The print setup menu enables the destination of
the printouts and language of the printouts to be set.
Depending on the measurement mode the printouts can
be customized to print off post analysis statistics.
Operating mode
Operator Id
Method Id
Wavelength
Sample interval
Sample Count
Results Destination
Cal Time/Date
ID
001 Photometrics
2
0
420
1
0
Internal
10 : 54 : 33 05/07/2010
TimeDateCell
01. 4.0. 091 10 : 54 : 40 05/07/2010
SPECTRUM
05/07/2010 11.19
1
/
1
BEER
05/07/2010 11.16
SAMPLE_1
30/07/2010 10.02
SAMPLE_1 ?
05/07/2010 11 : 11
0.000
0.000
400
09:02
ppm
ABS
nm